Frequently asked questions
Maintenance and cleaning for products upholstered in fabric
WATERPROOF NUBUCK
MAINTENANCE
Keep the product away from heat sources;
Avoid direct exposure to sunlight or very strong artificial light sources;
Afraid of humidity, therefore do not use outdoors.
CLEANING METHODS
To completely remove the stain, proceed with the following actions before it dries.
FRUIT: wipe with a sponge moistened with cold water
CHOCOLATE/COFFEE: dab with a sponge moistened with warm water
INK: follow method C
FAT/OIL: follow method B
WAX/CANDLE: Gently scrape off the wax with a dull knife or putty knife. Then use method B or cover the stain with several layers of paper towels and place the hot iron
MUD: gently remove as much dirt as possible with a spatula. Let dry, then vacuum.
If the stain persists, use the ammonia solution according to method A.
URINE: use method A
VOMITING: carefully remove, dab with a sponge moistened with cold water and follow the instructions of method A
A Use water-based cleaners, or dilute two tablespoons of ammonia in 1 liter of water.
Gently dab the stain with a cloth moistened with this solution, turning it so that only the clean side comes into contact with the stain.
B uses only dry cleaning solvents that are non-aggressive, pure and water-free.
Moisten a cloth with the solution and follow the procedure of method A
C Gently dab the stain with a cloth moistened with alcohol, turning it so that only the clean side comes into contact with the stain.
PURE VIRGIN WOOL
MAINTENANCE
This fabric has been treated in finishing with the “KD” Thermophysical System and is unalterable.
Neither wetting nor the iron will change the characteristics of the fabric.
Keep the product away from heat sources.
Avoid direct exposure to sunlight or very strong artificial light sources.
Afraid of humidity, therefore do not use outdoors.
CLEANING METHOD
To remove dirt, use a damp cotton cloth.
TEXPLAST/TECHNICAL FABRIC/SOFT TEXPLAST
MAINTENANCE
Keep the product away from heat sources.
Avoid direct exposure to sunlight or very strong artificial light sources.
TEXPLAST/SOFT TEXPLAST CLEANING METHOD
To remove dirt, use a cotton cloth or non-abrasive sponge moistened with water and neutral soap.
METHOD OF CLEANING TECHNICAL FABRIC
To remove dirt, use a specific anti-stain product and remove the product with a soft brush.
MAMBO AND LULU’ FABRIC
MAINTENANCE
Keep the product away from heat sources.
Avoid direct exposure to sunlight or very strong artificial light sources.
Afraid of humidity, therefore do not use outdoors.
CLEANING METHOD
For cleaning, use a damp cotton cloth.
OUTDOOR FABRIC
MAINTENANCE
High resistance fireproof fabric, suitable for naval and medical use.
Extremely resistant to daily use and therefore does not require special precautions for use.
CLEANING METHOD
For cleaning, use a damp cotton cloth.
VELVET
MAINTENANCE
Keep the product away from heat sources.
Avoid direct exposure to sunlight or very strong artificial light sources.
Afraid of humidity, therefore do not use outdoors.
CLEANING METHODS
To clean, spray the stain with water from a distance of 15-20 cm and wipe with a soft cloth. Don’t screw. Use a soft bristle velvet brush to remove dust.
